对应气动O型阀漏气的解决办法

由此快速通道进入阀门产品分类导航，了解 : 电动控制阀电动蝶阀电动球阀电动闸阀电动截止阀等系列阀门的产品、型号、技术与支持，上海丰企阀门有限公司的高品质产品与优质服务，助您的工程更为精确、安全、高效与稳定。欢迎选购！

原文：
　对应气动O型阀漏气的解决办法：　　　　1．更换执行机构的密封圈。　　　　2．更换汽缸处的密封圈。　　　　3．将减压阀的气压调节为3-5公斤，或者是将电磁阀下部处拆开通气动作几次，有时也有可能更换电磁阀。　　　　4．更换汽缸中的弹簧。　　　　解决汽缸漏气问题时一定要在根据实际的情况来考虑，比如说这阀是气开的，还是气关的。对于气开的阀，首先可以关闭其两端的手阀，然后让中控将此阀打开，先将连接处的连接片拆开，然后将气源切断，此时将减压阀处的气体放掉，注意这时的执行机构将转动90℃，最后换好以后一定要注意将执行机构的搬回到原来的位置。

“ Corresponding to the pneumatic valve leak O-solution”是由中国气动阀门网提供的阀门行业新闻，译文仅供参考。另外，中国气动阀门网还提供相关产品搜索：气动球阀、气动蝶阀、气动闸阀、气动截止阀、气动隔膜阀等。

译文：
Corresponding to the pneumatic valve leak O-solution: 1. Replacement of the actuator ring. 2. Replacement of the cylinder at the seals. 3. The pressure regulating valve is 3-5 kg, or disassemble the solenoid valve at the lower ventilation action several times, and sometimes may also replace the solenoid valve. 4. Replace the cylinder in the spring. Solve the problem cylinder leakage must be in accordance with the actual situation to consider, for example that the gas valve is open or gas related. Open the valve for the gas, we can start off their hands at both ends of the valve, and then let the control valve to open this, first open the connection at the connecting piece, then cut off the gas source, then the valve at the gas discharge out, pay attention to when the implementing agencies will turn 90 ℃, the last for a good future we must pay attention to the actuator to move back to its original position.

更多新闻：

原文来源：http://www.1qidongfamen.com/

2011-12-23 01:00